3-layer construction and warranty
Superior engineering for outstanding quality
Solid wood floors have some major drawbacks. Humidity fluctuations can cause the wood to warp, uneven subfloors require time-consuming sanding prior to installation, etc. In addition, a large amount of precious hardwood is needed to produce just a few square metres of flooring. Multilayer parquet from HARO easily solves these issues by using a balanced 3-layer construction with grains running in different directions. This reduces the natural swelling and shrinking of the wood by up to 70%. And compared to solid wood floors, multilayer parquet is also the better choice in terms of sustainability, eco-friendliness, and price-performance ratio.
The superior engineering of each of our parquet products guarantees that you always get the best and most special products. Only carefully selected precious wood species are used for the top layer, which is between approx. 2.5 mm and up to approx. 3.5 mm thick depending on the series. We also make an effort that is hardly noticeable from the outside, but is essential for the HARO brand quality: Below the top layer, solid spruce fingerstrips ensure the necessary stability. They are cross glued to optimally distribute the innate tensions acting within the individual layers. The 3000 Series features an HDF E1 coreboard as the stabilising middle layer. The bottom layer comprising the softwood backing veneer ensures long lasting dimensional stability. Without this complex multilayer construction, HARO Parquet would not be so perfectly suited for a floating installation.
HARO PARQUET gives you the peace of mind of having installed a safe and comfortable floor in your home. The best proof is the excellent fire behaviour, slip resistance and thermal resistance properties of our parquet floors.
3-layer construction for floating installation, full glue-down installation or installation with self-adhesive ComforTec system
1. Approx. 3.5 mm thick top layer of choice precious wood (approx. 2.5 mm in case of HARO PARQUET 3000/3500)
2. Solid spruce fingerstrips as the middle layer ((HDF-E1 middle layer in Series 3000/3500)
3. Softwood backing veneer
4. Optional: Silent Pro luxury installation layer (approx. 2 mm thick); with ComforTec: self-adhesive underside
|Installation height / series|
|Top layer (in mm)|
|Overall thickness (in mm)|
|Surface layer dimensions (in mm)|
||Plank 1-Strip (3-layer)
|3000||3500||4000||3000||3500||4000||4000**||4000 Plaza||4000 Plaza Bernsteineiche|
|approx. 2.5 mm||approx. 2.5 mm||approx. 3.5 mm||approx. 2.5 mm||approx. 2.5 mm||approx. 3.5 mm||approx. 3.5 mm||approx. 3.5 mm||approx. 3.5 mm|
|approx. 11 mm||approx. 12 mm||approx. 13.5 mm||approx. 11 mm||approx. 12 mm||approx. 13.5 mm||approx. 13.5 mm||approx. 13.5 mm||approx. 13.5 mm|
|15 years||15 years||30 years||15 years||15 years||30 years||30 years||30 years||30 years|
|Lock Connect||Top Connect||Top Connect||Lock Connect||Top Connect||Top Connect||Top Connect||Top Connect||Top Connect|
|once||once||several times||once||once||several times||several times||several times||several times|
Swipe left for more information
** Thermo wood, African Oak, Smoked Oak, Oak Arizona, African Douglas Fir, Ash Fancy
Wood is a living material and affected by fluctuations in ambient conditions. A solid wood floor shrinks in the wintertime because of the low air humidity, and swells in the warmer, more humid seasons. This causes warping as shown in the illustration. 3-layer HARO PARQUET has been engineered so that these forces have no effect on the beauty and durability of the floor.
Don’t give moisture a chance!
Our high quality standards are demonstrated once more with our moisture protection. We go far beyond the standard. Water drops stay on the floor surface with our multi-strip parquet, repelled by the impregnated top-layer strip joints on the inside of the parquet board (for Longstrip Beech and Maple, Series 4000 with 13.5 mm thickness).