3-layer construction and warranty
Superior engineering for outstanding quality
Solid wood floors have some major drawbacks. Humidity fluctuations can cause the wood to warp, uneven subfloors require time-consuming sanding prior to installation, etc. In addition, a large amount of precious hardwood is needed to produce just a few square meters of flooring. Multilayer parquet from HARO® easily solves these issues by using a balanced 3-layer construction with grains running in different directions. This reduces the natural swelling and shrinking of the wood by up to 70%. And compared to solid wood floors, multilayer parquet is also the better choice in terms of sustainability, eco-friendliness, and price-performance ratio.
Thecomplex processing that goes into each of our parquet boards guarantees that you can select the most extraordinary amongst the best products. Only carefully selected precious wood species are considered for the top layer, between approx. 3/32' and up to approx. 1/8'' thick depending on the series. We also go to great lengths below the surface – an essential aspect of HARO quality even if scarcely noticeable from the outside. Below the top layer, solid spruce fingerstrips are bonded to ensure the necessary stability. The precious wood layer is cross glued to optimally distribute the innate tensions acting within the individual layers. The 3500 series features a HDF E1 coreboard as the stabilising middle layer. The bottom layer comprising the softwood backing veneer ensures lasting dimensional stability. Without this complex multilayer construction, HARO Parquet would not be so perfectly suited for floating installation.
HARO® PARQUET gives you the peace of mind of having installed a safe and comfortable floor in your home. The best proof is the excellent fire behavior, slip resistance and thermal resistance properties of our parquet floors.
3-layer construction for floating installation, full glue-down installation or installation with self-adhesive ComforTec® system
1. Approx. 3.5 mm thick top layer of choice precious wood (with HARO PARQUET 3500 approx. 2.5 mm)
2. Solid spruce fingerstrips as the middle layer (HDF-E1 middle layer in the 3500 series)
3. Softwood backing veneer
4. Optional: Silent Pro luxury installation layer (approx. 3/32'' thick); with ComforTec®: self-adhesive underside
|Top layer (in mm)|
|Overall thickness (in mm)|
|Surface layer dimensions (in mm)|
|3500||4000||3500||4000||4000°||4000 Plaza||4000 Plaza Bernsteineiche|
|approx. 3/32''||approx. 1/8''||approx. 3/32''||approx. 1/8''||approx. 1/8''||approx. 1/8''||approx. 1/8''|
|approx. 12 mm||approx. 17/32''||approx. 12 mm||approx. 17/32''||approx. 17/32''||approx. 17/32''||approx. 17/32''|
|15 years||30 years||15 years||30 years||30 years||30 years||30 years|
|Top Connect®||Top Connect®||Top Connect®||Top Connect®||Top Connect®||Top Connect®||Top Connect®|
|once||several times||once||several times||several times||several times||several times|
Swipe left for more information
° Thermowood, African Oak, Smoked Oak, Oak Arizona, Ash Fancy
Wood is a vibrant material that is subject to a wide variety of fluctuations. Solid parquet contracts in winter owing to the dry air and then swells during warmer and damper times of the year. Unsightly deformations can therefore occur, like the cupping shown. 3-layer HARO® PARQUET is constructed such that these forces have no impact on the aesthetics and durability of the floor.
Moisture doesn’t stand a chance
Our high standard of quality is evident once more in our moisture protection. Our efforts here extend far beyond the standard requirement. Water drops stay on the surface of our multi-layer parquet, repelled by the impregnated top-layer strip joints on the inside of the board (Longstrip Beech and Maple 4000 Series with 13.5 mm thickness).