Click and ready - our installation system makes it easy for you

Laying design flooring for do-it-yourselfers

Whether it's a new build or a rented apartment, you can install most DISANO design floors yourself without any prior knowledge. With floating installation, you hardly need any tools and don't have to work with glue.

What other installation methods are there? How do you go about laying design flooring? Below you will find information on how to get started with laying design flooring yourself.

The topics at a glance

There are topics that you should consider in advance, such as the condition of the subfloor and which laying direction is best. But there are also interesting facts about insulation underlays and the special features of floating installation and full-surface bonding during the installation itself. Special topics on accessories, such as skirting boards, but also on special installation situations in bathrooms and on underfloor heating are explained.

The condition of the subfloor and its preparation

Before you can start laying the first plank, you need to prepare the subfloor. You can lay HARO design flooring on cement screed, mastic asphalt or V100 chipboard, for example. The subfloor must be firm, dry and level. This means that If the screed is new, it must dry for six to eight weeks. Think about additional moisture protection for screed and when laying on underfloor heating. We recommend a 0.2 millimeter thick PE film.

What special requirements does the subfloor in your home have? Your specialist dealer will be happy to advise you. We have also put together some videos on our YouTube channel that will help you.

What should you consider when choosing the laying direction?

The laying direction influences the effect of the room. Think about the direction before you start laying: What is the main source of light in the room? Examples of this are the patio door or a double-sash window. Lay the planks lengthwise to the incoming light to achieve a harmonious look and conceal the joints.

Whether large or small: find out here how you can visually influence the room proportions with the laying direction of the floor covering.

Is an additional insulating carpet pad necessary?

Light as a feather: impact sound insulation reduces room and impact sound. This is not only pleasant for your neighbors. The optimized walking comfort also increases your feel-good factor. DISANO LifeAqua and ClassicAqua have integrated insulation made from a high-density cork panel. With these floors, you don't need an additional insulating carpet pad. DISANO Project, on the other hand, is glued over the entire surface and therefore does not require an insulating carpet pad.

Floating installation: "Just do it" for DIY enthusiasts

Floating flooring is installed when it is not glued to the subfloor. The advantages? You can implement the project quickly and precisely. The innovative Top Connect connection ensures that the floor can withstand even heavy loads. You can walk on it immediately after installation. Nevertheless, it can be removed again quickly if you need to move.

The installation tools: You don't need glue or adhesive. A pencil, folding rule, saw and a little DIY skill are all you need. Thanks to the Top Connect installation system, laying is done with one click: angle in, press, done. Just like parquet or laminate flooring.

How is design flooring laid?

1. Start with the first row of planks in the right-hand corner of the room. Lay the first plank with the tongue side facing the wall and insert spacer wedges between them.
2. Lay the second plank to the left of it and press it into the first at the head end.
3. Finish the first row by pressing all the other planks into the previous plank at the head end from above. You will probably have to shorten the last plank of the first row. You should have an expansion gap of 10 to 15 millimeters to the wall.
4. Start the second row on the right again: use the leftover piece from the previous row for this. Angle the plank lengthwise with the tongue side facing the wall. You only need to apply light pressure. Only then do you lower the plank at the head end and lock with light pressure.
5. Lay all further rows as in steps 1 to 4.
6. The planks for the last row must be cut lengthwise so that an expansion gap of 10 to 15 millimeters remains.
7. Have you finished laying the flooring? Once the skirting boards and profiles have been fitted, your flooring is ready for your first steps.

Why do you need skirting boards and profiles?

If you install DISANO yourself, remember to also install skirting boards and profiles: The former give the room contour and make the contrast between the flooring and the wall more subtle. And above all, they conceal the necessary expansion gap between the floor surface and the wall.

Transition profiles function like bridges between floors or rooms. The result is a harmonious surface. Matching profiles are available for connecting floors of different heights.

Whether with moisture protection or matching the decor - our accessories are visually and technically matched to your design floor. For a complete flooring experience.

What about laying designer flooring in the bathroom?

The days of cold, white tiles in damp rooms are over: you can lay design flooring in the bathroom or kitchen. From our design flooring range, DISANO Project is waterproof and therefore particularly suitable. Thanks to the integrated moisture protection, you can also install DISANO LifeAqua or DISANO ClassicAqua in the bathroom. To ensure that the flooring sits perfectly and prevents moisture from penetrating, you should seek the help of a professional.

Is DISANO suitable for laying on underfloor heating or cooling?

The planks are multi-layered. Their shape remains stable even under temperature loads. They also have a low thermal resistance. Therefore, all DISANO design floors are suitable for installation on underfloor heating or underfloor cooling.

Before you start the floating installation on underfloor heating, you must lay a 0.2 millimeter thick PE film on the subfloor. This protects against moisture. Please also refer to the installation instructions. It is also possible to glue the floor to the underfloor heating. You do not need a film for this.

Are you proud of your new floor? We've put together some tips on floor care to keep you happy.