The complex processing for each of our parquet guarantees that you can select the most extraordinary amongst the best products. Only carefully selected precious wood species are considered for the top layer, between approx. 2.5 mm (3/32") and up to approx. 3.5 mm (1/8") thick according to the series. We also make an effort which is hardly noticeable from the outside, but is essential for the HARO quality. Below the top layer, solid wood fingerstrips ensure the necessary stability. They are cross glued to optimally distribute the innate tensions acting within the individual layers. The 3000 series features an HDF E1 coreboard as the stabilising middle layer. The bottom layer comprising the softwood backing veneer ensures lasting dimensional stability. Without this complex multilayer construction, HARO Parquet would not be so perfectly suited for a floating installation. The parquet strips can do without a third layer. They are always fully glued to the subfloor, which in this case also functions as the bottom veneer.
Looking for just the right floor?
The HARO product finder can help you!
2-layer construction for full glue-down installation
- PERMADUR® natural matt finish, bioTec® oil/wax finish or naturaLin® natural oil finish.
- approx. 3.5 mm (1/8") thick top layer of selected precious wood
- Solid spruce fingerstrips as the bottom layer
Available in the following variants:
| Strip Allegro |
| Strip Prestige |
| Strip Sinfonie |
3-layer construction for floating installation, full glue-down installation or installation with ComforTec
- PERMADUR® natural matt finish, bioTec® oil/wax finish or naturaLin® natural oil finish.
- approx. 3.5 mm (1/8") thick top layer of selected precious wood (with HARO PARQUET 3000 approx. 2.5 mm (3/32"))
- Solid spruce fingerstrips as the middle layer (3000 series: HDF E1 coreboard)
- Softwood backing veneer
- Optional: Silent Pro® luxury insulation layer (ComforTec: self adhesive back of the board)
Available in the following variants:
| Longstrip |
| Carré |
| Plank 1-strip |
| Plank Toscana |
Our two series HARO PARQUET 3000 and HARO PARQUET 4000 offer the perfect parquet for every area of application. If there isn't much space between the door and the floor, for example, we recommend the low-profile 3000 series. If the floor will have to stand up to increased traffic, wear and tear, the 4000 series is first choice.
With its low profile design, our cost-effective alternative is suitable particularly for renovations and remodelling. Sandable.
Specifications at a glance:
| Top layer thickness: | approx. 2.5 mm (3/32") |
| Total thickness: | approx. 12 mm (15/32") |
With its vast choice, HARO Parquet 4000 provides the perfect solution for almost all living and working environments. Top layer can be sanded several times.
Specifications at a glance:
| Top layer thickness: | approx. 3.5 mm (1/8") |
| Total thickness: | approx. 13.5 mm (17/32") |
| 2-ply strips: | approx. 10 mm (13/32") |
Guaranteed quality
No company becomes a market leader for nothing. The secret of our success is quality. That's why we confidently offer an extended warranty on all our HARO Parquet floors.
HARO PARQUET 3000
15 years warranty in residential applications
HARO PARQUET 4000
30 years warranty in residential applications
Warranty
Here you can find additional information on our extended warranty
